Category: NEX System

Capture One 6.2 – A55/33, NEX-5/3

Posted on By

The new Capture One 6.2 release includes raw conversion for the Sony Alpha 55, Alpha 33, NEX-5 and NEX-3. It offers enhanced options for local adjustments, additional camera controls for Canon and Nikon and improved XMP metadata functionality.

The release also adds camera support for the latest Samsung, Fuji, Ricoh, Panasonic, Canon, and Nikon camera models as well as camera support for Phase One IQ180, IQ160, and IQ140 including tethered support.

Capture One 6.2 includes the following new features and enhancements:
– Local adjustment of saturation and clarity
– Invert local adjustments mask
– Copy local adjustments mask from other layer
– Auto sync of XMP metadata (sidecars only)
– Additional camera controls for Canon and Nikon
– Improved OpenCL and 64 bit performance

Capture One 6.2 offer support for the following new cameras and ! hardware:
– Phase One IQ180, IQ160 and IQ140 including tethered support
– Canon 600D/Rebel T3i and 1100D/Rebel T3 including tethered support
– Fuji X100
– Nikon D5100* and tethered support for Nikon D-7000 (*preliminary)
– Panasonic DMC-GH2 and DMC-GF2
– Ricoh GR DIGITAL, GR DIGITAL II, GR DIGITAL III, GX100, GX200, GRX S10, GXR P10, GXR A12
– Samsung NX5, NX10, NX11 and NX100
– Sony SLT-A55, SLT-A33, NEX-3 and NEX-5

Learn more about Capture One 6.2 here

Download Capture One 6.2 here

0
Cameras (DSLR), NEX System, Software Reviews

Replacing NEX LCD cover glass

Posted on By

The Sony NEX-5 and NEX-3 both use the same plastic-framed, metal stamping mounted rear 3 inch 16:9 LCD display for composition, menus and image review. The original LCD has a multilayer structure claimed by Sony to reduce reflections, increase contrast and resist scratches. But in use, these rear screens have shown a tendency for the surface layer to delaminate, creating very ugly and distracting patchy reflections. It is easy to replace this surface film completely, with a new toughened glass surface. Continue reading »

12
Accessories - 3rd party, Equipment Reviews, NEX System

New HVL-F43AM Alpha flash with rotating design

Posted on By

Sony has announced a new HVL-F43AM flashgun using the same type of rotating body design found in the top of the line HVL-F58AM, to replace the existing HVL-F42AM with its traditional bounce design. At the same time, some more Alpha system accessories have been rolled out.

HVL-F43AM ‘rotator’ flash

With a powerful output of GN43 (105mm ISO100 m), the compact yet versatile HVL-F43AM flash from Sony is optimised for superb results with all A-mount cameras.

As featured on the HVL-F58AM, the innovative Quick Shift Bounce system allows flash head position to be adjusted instantly when switching between horizontal and vertical compositions. This maintains consistent shadow positions regardless of camera orientation, allowing easy creation of natural-looking ‘bounce’ effects.

Smart flash functions open up even broader creative lightning possibilities. Wireless Ratio Control makes it easy to select light emission ratios for up to three separate flash units*. This allows quick creation of sophisticated multi-point lighting effects without the need for complex professional equipment.

Ideal for everyday shooting and more serious applications, its dust- and moisture-resistant design makes the HVL-F43AM ideal for demanding assignments, indoors or outside.

Flash power levels are switchable in 22 increments, from 1/1 through to 1/128 level in 1/3 steps. High output power is complemented by a quick 2.9 second (approx.) recycling time. Despite the flash’s extensive functions, operation is refreshingly clear and simple via the high-quality LCD screen and direction buttons.

Main specification for external flash HVL-F43AM
Guide Number – 43 (105mm, ISO100・m)
Flash Coverage – 24-105mm (15mm focal length covered with built-in wide panel)
Flash Control – Pre-flash control, manual flash control selectable, direct through-the-lens (TTL) flash metering
Bounce Flash – Click positions: up (30°/45°/60°/75°/90°/120°/150°); down (8°); right (30°/45°/60°/90°); left (30°/45°/60°/90°)
Recycling time (based on Sony measurement) – Approx. 2.9 seconds (with alkaline battery)
Battery performance (based on Sony measurement) – Approx. more than 200 flash cycles (with alkaline battery)
Power level switching – 22 levels: (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128), 1/3 steps
Wireless Ratio Control – Available to control by 3 groups when used with DSLR-A900/A850/A700
Other features
Auto WB Adjustment with Colour Temperature Info; Auto zoom control optimised for image sensor size; High-Speed Synchro; Modelling Lighting; Test Lighting; Multi Lighting. Supports camera’s Red-eye reduction feature. Built-in wide panel and bounce sheet. High quality LCD screen.
Compatible Shoe – Auto-lock Accessory Shoe
Included items – Mini-stand, Case
Dimensions (WxHxD) – Approx. 75 x 129 x 87 mm
Weight – Approx. 340g (without batteries)
Power source – Four AA-size cells of the same type, either alkaline or Ni-MH

VCT-55LH bracket
The VCT-55LH is a versatile mounting bracket that offers space for mounting additional ISO cold shoe accessories. A useful add-on for all A-mount cameras by Sony, the bracket can also be used with E-mount cameras such as the NEX-5, NEX-3 and the Handycam® NEX-VG10E HD camcorder.

Other accessories – like a shotgun microphone – can be securely mounted while the camera’s main shoe is occupied. The VCT-55LH is ideal for use with the CLM-V55 clip-on LCD monitor that offers a clear, high-resolution view of images during video and still shooting.

Soft Carrying Case LCS-AMB
The LCS-AMB carry case protects your A-mount camera and attached standard zoom lens while you’re travelling. A special suspended partition cradles the camera securely while allowing quick access. Finished in durable black polyester material, the case can be slung over a shoulder using the supplied strap, carried by the grab handle or attached to a belt. It also features handy pockets with space for up to two extra batteries, spare memory card and lens cap. (NB: Not compatible with DSLR-A900/A850).

Lens Hood ALC-SH111
Compatible with DT 35mm F1.8 SAM and 85mm F2.8 SAM lenses, this round-profile hood shades from direct sunlight to prevent glare and lens flare.

See all accessories by Sony for the α camera system here: www.sony.co.uk/hub/dslr/accessories

The new HVL-F43AM external flash, VCT-55LH bracket, LCS-AMB soft carrying case and ALC-SH111 lens hood for α cameras by Sony are available from Spring 2011.

0
Accessories - Minolta/Sony, Bags, cases and trivia, Cameras (DSLR), Flash units, News, NEX System

Pro underwater housing for NEX-5

Posted on By

Most underwater housings for compact cameras are basic items intended for use down to 10m or so. The NEX-5, with its magnesium alloy body and exceptional 16mm f/2.8 optic with fisheye and wide conversion options, is worth far more than that. It can be turned into the modern-day equivalent of the Nikonos rather than a modern day equivalent of that peculiarly unreliable subaqua Vectis which Minolta bowed out with…

Here’s something which we found in an email for B&H Photo Video. It is not exactly cheap – you are looking at a near-$2000 investment to take your NEX and lenses below the waves – but it’s got a specification to make serious subaqua shooters rush for that low-cost NEX-5 outfit to complete the kit. Especially as anything similar for DSLR cameras may cost 50%, 100%, even more than this.

There is a waiting list now – the Montreal manufacturer (reports Photoclubalpha forum member Javelin) is 4-6 weeks from delivery after a big rush following the product announcement. So if you want one of these for summer, get your order in right now, do not delay as all production is likely to be pre-ordered this year.

To complete this you need an extension and dome port front, of course

The Aquatica AN-5 Underwater Housing for Sony NEX 5 Camera is a compact (5.5 x 3.25 x 6″/14.2 x 8 x 15.4 cm) housing machined from a solid block of aluminum designed for the Sony NEX 5 camera. This lightweight (2.2 lbs/1 kg) housing has a baked-on powder coating and is fully anodized against the corrosive effects of sea water. It has replaceable sacrificial anodes, plus pad printed function labels that won’t peel off or fade. It has built-in dual optical connectors, and all controls are easily accessed, with the LCD screen at a more-comfortable 15° viewing angle. A variety of ports are available for the AN-5 housing.

Note: Requires Lens port
Also Note: Most zoom lenses require a close-up diopter filter to correct focus distance.

  • Accurately balanced ergonomic design – all controls are within easy reach.
  • Depth rating: 300′ (90 m).
  • Excellent balance underwater.
  • Replaceable sacrificial anodes protect the housing from electrolysis.
  • Precision machined from a single aluminum block
  • Lightweight and compact housing is fully anodized
  • Covered with baked-on powder coating to protect against the corrosive effects of sea water
  • All function labels are pad printed so they will not peel off or fade.

Pre-order from B&H

This is a new product, and B&H show it as available for pre-order, along with the accessory ports (to fit either the 18-55mm zoom, the 16mm f/2.8 alone or the 16mm fitted with the VCL-ECF1 fisheye converter) and accessory L-type hand grip. See comments above about production and orders. This is a hot product and likely to be hard to get.

The housing is compatible with the Sea & Sea Y110a slave-strobe underwater flash. This will set you back the better part of $1000 more, but it’s been tested synched with the NEX mini flash and apparently all works well. Flash is essential for good colour at depth, even down 5m or so and you’ll require it in many water conditions. The premium option is the twin Y110a dual unit (the housing has two optical connectors for the strobe’s fibre optic triggering cables).

If you are put off by the cost, maybe you can’t afford that two week trip to the Maldives to photograph manta ray convocations – the basic housing is $1399, a typical dome port as shown is $499 (for the 16mm lens alone, only $159 and the cheapest option), the L-grip is $59, there’s also an optional zoom control. But 90m diving with an APS-C live view autofocus camera with f/2.8 lens focusing down to a few inches, usable ISO to 1600 and then more, has to make this worth the cost. And if you want to match the combo, you can easily spend $10,000 on a DSLR with housing which will not get into the same space or handle anything like as well.

– DK

0
Accessories - 3rd party, News, NEX System

Zeiss, Cosina, Sigma and Tamron – NEX E-mount future

Posted on By

Sony Corporation announced today it will disclose the basic specifications of its “E-mount” for interchangeable single lens cameras, without fee, to manufacturers of lenses and mount adaptors, starting April 1st, 2011. This was previously confirmed at the photokina press conference – now they have revealed that Carl Zeiss AG, Cosina, Sigma and Tamron will all be working on the E-mount system as independent lens makers.

“This opens the way for manufacturers of various lenses and mount adaptors to effectively develop products conforming to “E-mount” specifications”, say Sony.

The NEX E-mount revealed – ten contacts, three flanges and a mere 18mm of register distance…

“Users of the Sony’s NEX-3, NEX-5, NEX-VG10 and other E-mount compatible Sony digital imaging products to be launched in the future will now be able to use interchangeable lenses from both Sony and various other manufactures, while they will also be able to attach non-Sony lenses to their Sony digital imaging products via a mount adapter. Sony believes the growth of digital imaging products employing the “E-mount” will further increase the enjoyment of photography and video shooting among an even wider range of users.

“These basic specifications will be disclosed to manufactures of lenses and mount adaptors following a predefined process of approval and the signing a license agreement with Sony.

“As of today, the decision to disclose basic specifications of the E-mount has been endorsed by the following companies.”

(there follow these manufacturer statements)

Carl Zeiss AG
As an independent lens provider, Carl Zeiss welcomes the disclosure of the E-mount specifications by Sony. It helps manufacturer’s product development, benefits customers and therefore assists in establishing E-mount as a new, healthy and strong system on the market.

Cosina Co., Ltd.
Cosina Co., Ltd is excited by the potential of Sony’s E-mount which enables to a large-size image sensor to be incorporated in a compact, interchangeable lens camera. We have high expectations for the E-mount with its aims to create a new photography culture, and express its assent to Sony’s decision to provide information related to E-mount.

Sigma Corporation
Sigma Corporation fully supports Sony’s decision to disclose basic E-mount specifications. We believe this move will spur the further growth and diversification of camera system across the industry, provide photo enthusiasts with a wealth of choice and enrich in their photographic lifestyles.

Tamron Co., Ltd.
Tamron Co., Ltd endorses Sony’s decision to disclose basic E-mount specifications. We aim to offer our customers new solutions and unprecedented photo-shooting enjoyment through the manufacture and sale of E-mount lenses.

Editorial comment: at the photokina conference, the wording used seemed to imply that independent E-mount camera bodies were also a possibility. Of the makers above, three already have a history of making rangefinder or compact style large sensor bodies – Zeiss (to date, film only); Cosina (digital, in the form of the Epson Leica mount bodies with 6 megapixel Sony sensors) and Sigma (the DP-1 and 2 series have fixed lenses, but would be a natural candidate for conversion to E-mount form). If this was to be the case, in a future announcement, the E-mount would be established as an alternative to the Micro FourThirds system with a capacity to use sensors in formats between 2X and 1.5X with existing lenses, and possibly up to full frame in a secondary configuration with a different range of lenses (backwardly compatible with smaller sensors).

Is this the same Sony people rant about being protective and exploiting their customers? No. It is Sony listening to their customers. It’s Alpha becoming the 21st century equivalent of Leica.

2
News, NEX System

Alpha and NEX overtake Nikon UK DSLR sales

Posted on By

Chris Cheeseman writes in Amateur Photographer, reporting on figures released by photo industry analysts GfK, that Sony interchangeable lens camera sales in the UK have overtaken Nikon, moving the company into second position behind Canon.

http://www.amateurphotographer.co.uk/news/canon_and_nikon_lose_ground_as_camera_wars_hot_up_news_305118.html

In the Japanese home market, Canon remains top, Nikon second and Sony is third with over 15% of the market share. No attempt is made by AP to analyse the importance of Sony having a market share which is roughly half that of Nikon and Cano respectively, in that market.

The figures relate to the year 2010 – a calendar year – and it needs to be considered that Sony’s NEX system effectively went on sale slightly before midway during that term, and the SLT system one quarter later. Some Sony models were only introduced after photokina, in the final three months of the year.

In fact, it’s almost impossible to judge Sony’s impact when 2010 is viewed as a year rather than in terms of monthly or quarterly figures. If a graph was to be drawn with four lines on it – Nikon, Canon, Sony and ‘everything else’ – it looks as if the 11% overall decline in Nikon and Canon would contrast with a steep late year climb from Sony.


0
Cameras (DSLR), News, NEX System

A-mount autofocus upgrade for NEX-VG10E

Posted on By

Available now for download, a free firmware upgrade adds autofocus support with 14 A-mount SAM and SSM lens models. AF compatibility of the NEX-VG10E with A-mount lenses requires the optional LA-EA1 Mount Adaptor, plus a separate firmware upgrade for the LA-EA1.

Man using NEX-VG10E with 18-200mm OSS lens and mic windshield, in Fuerteventura last week. Alphaspotted by Shirley Kilpatrick.
The upgrade lets videographers enjoy smooth, accurate AF operation with the family of A-mount optics that includes telephotos, primes and zooms by Sony and Carl Zeiss.
The latest firmware upgrade by Sony for registered Handycam® NEX-VG10E customers is available free of charge from http://support.sony-europe.com/dime/camcorders/hd/msc/msc.aspx?&m=NEX-VG10E.
Editor’s comment: AF is already offered by the NEX-3 and NEX-5 with the adaptor and the same group of SAM and SSM lenses. However, it could not really be described as ‘smooth, accurate’ – more like ‘just acceptable’. So perhaps the VG10E’s firmware fix is a better one and perhaps a further firmware release may arrive improving A-mount AF with the 3 and 5.

0
Accessories - Minolta/Sony, HD Video, Lenses - Alpha Mount, NEX System

Sony to develop Super-35mm pro camcorder

Posted on By

Sony Corporation announced today that it is developing a new type of E-mount interchangeable lens camcorder for professional use that is equipped with a Super-35mm equivalent large format CMOS sensor. This new addition to Sony’s professional “NXCAM” line will be available in the middle of 2011.

Editor’s Note: Super-35mm is not full frame 35mm. The 35mm movie format is what we call half-frame in still photography, or a little over 18 x 24mm – a size very close to the nominal 16 x 24mm of the DT/DX format used by Sony for APS-C sensors. Sony may decide to use a normal APS-C sensor for this, or to use a true 16:9 ratio for HD Video. However, Super-35mm normally means a squarer image format. No doubt internet forums will be full of folk claiming that Sony has gone full frame frame on the E-mount just like they said, etc etc – well, that is not the case. Super-35mm does not mean full frame (technically, double frame 35mm).
But this sensor may be significantly larger than existing APS-C, at a possible 25 x 18.5mm rather than 23.5 x 15.5mm or thereabouts (please note that one APS-C sensor is already quoted as being 16 x 24mm). Alpha A-mount lenses will of course cover this easily; E-mount NEX lenses may have been designed to do so from the start, though it may be pushing it to expect corner quality unless OS is disabled. By definition, all OS-type lenses must have a larger circle of coverage than the format they are designed for – often considerably larger. Turning off OS would enable any properly designed OS lens to cover a bigger sensor without any corner vignetting or loss of sharpness.
Remember where you read this first – 17.30hrs on November 17th! – DK
Continue reading »

0
HD Video, NEX System
1 … 7 8 9 10 11